Description
– Level reader for any tank shape
– Digital monitoring with high accuracy
– Easy installation with adjustable height
– Safe to use in explosive environment
– Wide level range for any depth
– Level sensor compatible with most liquids
– Modular housing suitable for mounting
on 35mm DIN rail (EN 50022)
User interface
To install the level sensor :
 Make a hole on the top of the tank with a
diameter between 33 and 37 mm
 Insert the probe into the tank until it reaches the bottom
 Adjust the flange position and fix it on the top of the tank
 Connect the 2 sensor wires with the module
 Connect the module with 220VAC power supply
To set the FULL level (N.B: The tank must be full of water) :
 Put a jumper on the sensor connector for 3 seconds
 The display will blink 99, then you remove the jumper
The level sensor standard sizes : 1 meter, 1.25 meter, 1.5 meter,
1.75 meter, 2 meters and any else will be made on demand
In case the sensor wires are set up with high power cables or with
high frequency lines or in highly parasite area, it is preferred to use
a shielded cable for the sensor to prevent reading disturbance
o S C : Short circuit connection
o O C : Open circuit connection